Ground penetrating radar for concrete scanning and inspection. The MALÅ GPR CX Concrete Imaging System allows you to perform ground penetrating radar scans of concrete structure simply and safely and present data clearly for real-time and in-the-box 3D data acquisition, display and analysis. The MALÅ GPR CX System provides accurate inspection of concrete structure such as floors, walls, slabs, bridge deck for the detection of metallic and non metallic objects and features, i.e. rebar, post tension cables, metallic/ non-metallic conduits and pipes, voids, as well as the measurement of slab thickness.

Applications

Advantages

  • Void Detection
  • Tunnel Assessment Surveys
  • Post- Pre-tension Cable Location
  • Rebar Location
  • In-Slab Conduit Location
  • Void Detection in Concrete
  • Slab Thickness Measurement
  • Concrete Evaluation
  • Bridge Deck Evaluation
  • Ice Thickness Measurement
  • Tree Trunk and Root assessment
  • MALÅ High Frequency Antenna Cart
  • MALÅ CX Control Unit: Unique for the
  • MALÅ CX System MALÅ CX System: The #1 Concrete GPR System
  • MALÅ CX System: Unique user-friendly software

Technical Specifications

Pulse repetition frequency 100Khz
Sampling frequency 6 -700 Ghz
Acquisition mode Distance/time/manual, Grid measurements are controlled by remote controls on antenna/handle, with audio response.
Operating time 6 hours

For more detailed Specifications see here.

Accessories

  • MALÅ Distance Measuring Wheel Ø300 mm
    MALÅ Distance Measuring Wheel Ø300 mm

    The MALÅ Distance Measuring Wheel Ø300 mm is commonly used with the MALÅ 100 MHz Shielded Antenna. It is a larger wheel that allows for measurements in rougher terrains.

  • MALÅ HF Cart
    MALÅ HF Cart

    The MALÅ HF Cart is designed as a carrier for the MALÅ HF Antennas. The MALÅ HF Cart allows for robust, reliable and precise positioning of your high frequency GPR investigations.

  • MALÅ Distance Measuring Wheel Ø150 mm
    MALÅ Distance Measuring Wheel Ø150 mm

    The MALÅ Distance Measuring Wheel Ø150 mm is mostly used with the MALÅ 800 - 250 MHz Shielded Antennas.

  • MALÅ Distance Measuring Wheel HF
    MALÅ Distance Measuring Wheel HF

    The MALÅ Distance Measuring Wheel HF is a very small wheel dedicated and designed to allow precise positioning when operating the MALÅ HF Antennas.

  • MALÅ Hip Chain
    MALÅ Hip Chain

    The MALÅ Hip Chain is used with the MALÅ Unshielded Antennas and also the MALÅ RTA Antennas.

  • MALÅ Tripod with digital or mechanical depth encoder
    MALÅ Tripod with digital or mechanical depth encoder

    For borehole GPR surveys the MALÅ Tripod is used to lower the MALÅ Borehole Antennas into the borehole of investigation. The MALÅ Tripod is available with two optional measuring wheels; digital and mechanical.